TOP

AT&T Office@Hand

Learn how to use features from AT&T Office@Hand. Access our self-help options to set up and use this application to communicate with customers.

Back to Product Page
Use the dropdown to get support, or purchase this product

Related Content

Ask the forum link
Cisco SPA-122 ATA – Bridge Mode | AT&T Office@Hand #4741
Ask the forum link
Deskphones – Cisco – Hardware Issues – No Audio | AT&T Office@Hand #11102
Ask the forum link
Network – Setup Netgear’s QoS Settings | AT&T Office@Hand #3558
Ask the forum link
Polycom Corporate Directory – Overview | AT&T Office@Hand #8264
Ask the forum link
Automatic Call Recording | AT&T Office@Hand #4018
Ask the forum link
Fax – Sending Faxes Using Email (Email-to-Fax) | AT&T Office@Hand #3309
Ask the forum link
Caller ID – Caller ID Name | Frequently Asked Questions | AT&T Office@Hand #4284
Ask the forum link
Deskphones – Cisco – Transfer Calls #11094
Ask the forum link
Voicemail ­ Setup User’s voicemail greeting | Admin | AT&T Office@Hand #2737
Ask the forum link
Office@Hand Frequently Asked Questions #3602

Polycom Phones – How to Set or Change Date and Time | AT&T Office@Hand
Article #11098

Resolving incorrect date and time on Polycom phone. When a Polycom phone is added to to an account, the phone’s date and time is acquired from the RingCentral User account’s date and time settings. When the phone is unable to sync with RingCentral’s date and time servers, the phone may display an incorrect date and time.

Set or Change Date and Time on Polycom Phones

It is not uncommon for users within an account to be located in various time zones. If the date and time are incorrect for a specific user, it may be necessary to change or set the correct time zone for that user. To change or set the time as a User please see: User Hours – Set a User’s Hours of Operation and Time Zone – Admin | AT&T Office@Hand. Similarly, it may be necessary for an account Admin to set a Users time zone.

How to Set or Change Date & Time on Polycom Phone

  1. Press Menu/Home button.
  2. Select Settings, and then go to Advanced.

    Select Settings, and then go to Advanced.

  3. Select Admin Settings.

    Select Admin Settings.

  4. Enter the phone’s admin password. The default password is 456 or just leave it blank.

    Enter the phone's admin password. The default password is 456 or just leave it blank.

  5. Select Network Configuration.

    Select Network Configuration.

  6. Highlight SNTP Address then press Select.

    Highlight SNTP Address then press Select.

  7. Press the number key “#” to enter RingCentral’s SNTP Address, and then select
    OK.
    Note: Press the star (*) button to enter period (.)

    Press the number key "#" to enter RingCentral's SNTP Address, and then select OK.

    URL IP Address
    ntp1.ringcentral.com 199.255.122.221
    ntp2.ringcentral.com 199.68.212.202
  8. Press the Back softkey or the Left Arrow Key button until you see the Save Config? prompt, then select Yes.

    Press the Back softkey or the Left Arrow Key button until you see the Save Config? prompt, then select Yes.

    Note: Phones that will not work with RingCentral

    • Polycom Lync CX Series phones (CX100, CX300, CX500, CX600, CX3000, CX5100)
    • Retired Polycom SoundPoint IP phones: IP300 / IP301 / IP320 / IP330 / IP430 /
    • IP500 / IP501 / IP600 / IP601
      Retired Polycom SoundStation IP phones: IP4000 / SoundStation Premier

Related Polycom Topics:
Deskphones – Using Polycom IP Phones | AT&T Office@Hand
Office@Hand: Manual Provisioning for Polycom IP Phones
Office@Hand: Assisted Provisioning for Polycom IP Phones

Key Words: 11098, date, time, change, select, change, correct, set, fix, date and time, time and date, Polycom, phone