Initiate Three-way Conference Call – Cisco Phones | AT&T Office@Hand
Article #5180

Initiating a 3-way conference call on Cisco devices are possible with AT&T Office@Hand. This functionality is supported on the following devices: Cisco Linksys 2102 ATA, Cisco Linksys PAP2T ATA, Cisco SPA-122 ATA, Cisco SPA-303 Desk Phone, Cisco SPA 508G Desktop IP Phone, Cisco SPA 514G Gigabit IP Phone, Cisco SPA 525G2 Desktop IP Phone, Cisco SPA-504G Desk Phone, Cisco SPA-508G Desk Phone, Cisco SPA-509G Desk Phone, Cisco SPA-514G Desk Phone, Cisco SPA-525G2 Desk Phone, and Cisco SPA- 525G Advanced Executive Color IP Phone.

Initiate a Three-way Conference Call on Cisco Phones

Click your device below to learn more.

Cisco Linksys 2102 ATA
Cisco Linksys PAP2T ATA
Cisco SPA-122 ATA
Cisco SPA-303 Desk Phone
Cisco SPA 508G Desktop IP Phone
Cisco SPA 514G Gigabit IP Phone
Cisco SPA 525G2 Desktop IP Phone
Cisco SPA-504G Desk Phone
Cisco SPA-508G Desk Phone
Cisco SPA-509G Desk Phone
Cisco SPA-514G Desk Phone
Cisco SPA-525G2 Desk Phone
Cisco SPA-525G Advanced Executive Color IP Phone

Start a Conference Call on Cisco ATA

1. During an active call, press the Flash button. The first call is placed on hold, a
   second line is opened, and you hear a dial tone.
2. Dial the second person’s telephone number.
3. Press the Flash button again. All 3 parties are connected in the conference call.
   Note: When you hang up, the other 2 parties are disconnected.

Start a Conference Call on Cisco Deskphones and IP Phones

1. Press the conf softkey during an active call. The first call is placed on hold, a
   second line is opened, and you hear a dial tone.
2. Dial the second person’s telephone number.
3. Press the “conf” softkey again. All 3 parties are connected in the conference
   call.
   Note: When you hang up, the other 2 parties are disconnected.

Key Words: 5180, Conference Call, Conference, three way, 3 way, Cisco, ATA, IP Phone, Desk Phone

Was this page helpful? Yes No