Configuring your Incoming Call Information Settings | AT&T Office@Hand
Article #2608

This article provides instructions for administrators and/or users on how to configure the Incoming Call Information section in the user extension settings.

The Incoming Call Information provides details about the inbound call received or forwarded to a user extension.

1. Log in to the AT&T Office@Hand online account.
2. Follow the navigation path depending on your access profile:
   • Admins: On the Quick Access page in the admin portal, navigate to Users > Manage Users. Select the extension to configure, then click Call Forwarding and Voicemail.
   • Users: Navigate to Settings > Call Forwarding and Voicemail.
3. Click Settings, then click Edit below Incoming call information.
4. Under Incoming Number Displayed to Me on the Display number tab. Select which number should be displayed when you receive a forwarded call under:
   • Incoming Caller ID: Displays the phone number of the person calling.
     • Check the box for If number is blocked or unknown, display my main AT&T Office@Hand number as the Caller ID instead if you want this option.
     • Under Add Special Number, you can add numbers before
       (pre-appended) or after (post-appended) the incoming number to help you
       identify the call.
     • Under Display This Call Information on, select whether configured incoming caller information will be displayed to Non-AT&T Office@Hand phones only or to All phones.
   • Called Number: Displays the phone number the person dialed. If you use your business phone for personal use as well, it allows you to identify business calls and answer them appropriately.
     NOTE: Some carriers do not support sending caller ID with pre-appended or post-appended digits. Please test to ensure this functionality is supported by the appropriate carrier device the call will be forwarded to.
5. Click the Play Announcement tab, then set your preferences:
   • Direct Calls: Allows you to hear an announcement when your extension or phone is called directly. This is helpful for identifying how you should answer the phone, especially if you use the phone for both business and personal use. You can select the following options under this setting:
     • For Non-AT&T Office@Hand phones only: Plays the announcement when forwarding a call to your home or mobile phone, but not when forwarding to an AT&T Office@Hand desk phone. You will not be prompted to press 1 to accept calls.
     • Always: Applies your incoming number display settings to all of your phones. You will be prompted to press 1 to accept calls on your non-AT&T Office@Hand phones and AT&T Office@Hand IP Phones. You will not be prompted to press 1 to accept calls on your AT&T Office@Hand Phone for Mobile and AT&T Office@Hand Phone.
     • Never: Never plays the announcement. You will not be prompted to press 1 to accept calls on any phones. AT&T Office@Hand, however, will not be able to tell when your mobile or home voicemail picks up, and business calls may receive your personal voicemail.
     • The prompt or announcement will give you the following options:
       • Press 1 to accept the call
       • Press 2 to send caller to voicemail
       • Press 3 to disconnect the call
       • Press 6 to forward the call to another extension
       • Press 7 to forward the call to another phone number
       • Press 8 to hear the caller’s name again (only applicable when Call Screening enabled in the User’s extension)
       • Press # to repeat the menu
     • NOTE: If you do not press an option, the caller will be sent to your
       voicemail. If you chose to forward the call to an answering service, it is important to have the Play Announcement before connecting and set to Never.
   • Call Queue Calls: Applies if you are a member of a call queue. This is helpful for identifying how you should answer the phone, especially if you are a member of multiple call queues. You can select the following options under this setting:
     • For Non-AT&T Office@Hand phones only: Plays the announcement when forwarding a call to your home or mobile phone, but not when forwarding to an AT&T Office@Hand desk phone. You will not be prompted to press 1 to accept call queue calls on your AT&T Office@Hand IP Phone, AT&T Office@Hand Phone, and AT&T Office@Hand Phone for Mobile. You will still be prompted to press 1 to accept call queue calls on your non-AT&T Office@Hand phones.
     • Always: Applies your incoming number display settings to all of your phones. You will be prompted to press 1 to accept call queue calls on your AT&T Office@Hand IP Phone and non-AT&T Office@Hand phones.
       You will not be prompted to press 1 to accept call queue calls on your AT&T Office@Hand Phone and AT&T Office@Hand Phone for Mobile.
6. Check the box for Include mailbox name in announcement if you prefer mailbox name to be included in the announcement. If this option is unchecked and you get a call queue call, the prompt will say, “Queue Call, to accept this call, press 1.” If you are supposed to accept calls from the Sales and Technical Support call queues, for example, checking this option will let you know if the call you are getting is for Sales or Technical Support.
7. Check the box for Require my pin to answer if you want your PIN to be entered before accepting a call. This is helpful if you do not want other people to accept your calls, such as when you have a home office and do not want your children to answer business calls.
8. Click Save.

Keywords: 2608, extensions, incoming call information, Caller ID, Called Number, call handling, call information settings, announcement to press 1

12/2021

Was this page helpful? Yes No