AT&T Office@Hand

Learn how to use features from AT&T Office@Hand. Access our self-help options to set up and use this application to communicate with customers.

Back to product page

Office@Hand: Yealink W52P and W56P Handset Registration (Pairing)
Article #7032

How to pair the Yealink W52P and W56P?

The Yealink W52P and Yealink W56P Cordless Phone supports up to 4 handsets when used with the AT&T Office@Hand service. Follow these steps when pairing additional handsets to the Yealink W52P or W56P Cordless Phone.

Note: The Yealink W56P will be replacing the Yealink W52P as Office@Hand cordless phone offering. The Yealink W52P will come with a new handset called the W65H. To setup the Yealink W52P or W52P follow the steps below.

  1. Long press the Wireless button on the base until it begins to flash. LED slow flashes, indicating the base station is in the registration mode.

    Long press the Wireless button on the base until it begins to flash. LED slow flashes, indicating the base station is in the registration mode.

  2. Press the OK button on the handset to access the Directory.

    Press the OK button on the handset to access the Directory.

  3. Using the Navigation keys, select and press Settings.

     Using the Navigation keys, select and press Settings.

  4. Select Registration > Register Handset.
  5. Select Base1.
  6. The handset will try to search for the base. Once found, press OK.
  7. Enter the system PIN (default: 0000) and then press Done.
  8. Successful pairing of the handset to the base will show the confirmation “Handset Subscribed”.
    Note: You should also see the name of the user associated with the cordless phone on the display of the newly paired handset after a few seconds.

See Also:
Office@Hand: Assisted Provisioning for Yealink T-21 or Yealink W52P Phones

Keywords: 7032, yealink, w52p, handset, register, registratiion, pairing, pair