RingCentral Office@Hand from AT&T

Learn how to use features from RingCentral Office@Hand from AT&T. Access our self-help options including our How To Videos to set up and use this application to communicate with customers.

Back to product page

Initiating a three-way Conference Call in Cisco SPA 300 series
Article #5180

This article will guide you on how to initiate a three-way Conference Call in Cisco SPA 300 series.

To initiate a conference call, choose your device model below for detailed instructions.

• Cisco SPA 301
• Cisco SPA 303

Cisco SPA 301

To do this, follow the steps below:

Step 1:
During an active call, press the Flash button. The first call is placed on hold, a second line is opened, and you hear a dial tone.

Step 2:
Dial the second person’s telephone number.

Step 3:
Press the Flash button again. All three (3) parties are connected in the conference call.

NOTE:  When you hang up, the other two (2) parties are disconnected.

Cisco SPA 303

To do this, follow the steps below:

Step 1:
Press the conf softkey during an active call. The first call is placed on hold, a second line is opened, and you hear a dial tone.

Step 2:
Dial the second person’s telephone number.

Step 3:
Press the “conf” softkey again.  All three (3) parties are connected in the conference call.

NOTE:  When you hang up, the other two (2) parties are disconnected.

If you want to perform conferencing held call with an active call Cisco SPA 303.

If you have a call on hold and an active call, you can create a conference call between the active call, the call on hold, and yourself.

With an active call and one or more calls on hold, press the “confLx” softkey.

• If you have only one call on hold, the conference call is created between the three of you.
• If you have more than one call on hold, choose the held call you

You have now initiated a three-way Conference Call in Cisco SPA 300 series.