AT&T Office@Hand

Learn how to use features from AT&T Office@Hand. Access our self-help options to set up and use this application to communicate with customers.

Back to product page

Configuring QoS on a Netgear Router to Prioritize VoIP Traffic  
Article #3558

How do I configure QoS on the Netgear N900 to Prioritize VoIP Traffic?

The instructions in this article will guide you on configuring your Netgear router QoS with your AT&T Office@Hand service.

Netgear N900
Netgear G54

Netgear N900

  1. Open your browser and navigate to http://192.168.1.1.

  2. Log in to the router’s web-based setup page. The default username is “admin”.

    Note:  The default password is “password”.

  3. Under the Advanced header, select WPS Setup.

  4. Select Setup.
  5. Select QoS Setup.

  6. Check the box next to Turn Internet Access QoS On.
  7. Check the box next to Turn Bandwidth Control On.

  8. Select the Uplink bandwidth Maximum radial button.
  9. Enter in your current upload speed.

    Note:  If unsure of the current upload speed, run a speed test at http://officeathand.att.com/capacity.html.

  10. Click Apply to save any changes and reboot the router before proceeding.

Netgear G54

  1. Open your browser and navigate to http://192.168.1.1.

  2. Log in to the router’s web-based setup page. The default username is “admin”.

    Note:  The default password is “password”.

  3. Under the Advanced header, select QoS Setup.

  4. Check the box next to Turn Internet Access QoS On.

  5. Check the box next to Turn Bandwidth Control On.
  6. Select the Uplink bandwidth Maximum radial button.
  7. Enter in your current upload speed.

    Note:  If unsure of the current upload speed, run a speed test at http://officeathand.att.com/capacity.html.

  8. Click Apply to save any changes and reboot the router before proceeding.

Keywords:  Netgear N900, QoS, 3rd Party Devices, dropped calls, netgear g54